The Hillco Pivoting Spout will fit any 17” high unload rate auger. You would also find them on 60 and 70 series combines, or S series, that have the 17” unloading augers.
Read more below.
It has been a long time coming but we are ready to re-introduce the Hillco Pivoting Spout for John Deere combines. Please welcome the new and improved JPS1720!
What’s new? First, the injection mold boot will come in one single piece looking similar to the factory spout. The spout tip is also smaller in diameter, allowing a tighter spread and a more accurate pour while maintaining volume. We kept the actuator in the same spot, which is on the side of the auger, away from potential hazards that might occur while unloading. The new design increased the total pivot from 33° in our previous model to 37° for our latest iteration. From the stock boot position, you will get 23° of downward pivot, allowing you to pour almost straight down. The 14° of upward pivot will give you over three feet of grain throw over the standard boot.
You will control the pivoting spout with the foot rocker switch that you can mount anywhere on the floor of the cab. Whether you are unloading on the go into a grain cart or topping off a truck, the pivoting spout will give you the ability to better utilize the limited space you have.
Will it fit my combine? The Hillco pivoting spout will fit any 17” high unload rate auger. You would also find them on 60 and 70 series combines, or S series, that have the 17” unloading augers. You will keep the stock grain flap in the auger to keep grain from flowing out after unloading.
What’s the price? The pivoting spout will start at a list price of $2,200 plus freight.
To place an order, give our sales team a call at 800-937-2461.