Hillco Technologies

Twitter Facebook-f Youtube
Contact
  • 800-937-2461
  • info@hillcotechnologies.com
Twitter Facebook-f Youtube

The Lastest at Hillco

Get the latest product updates, news, and more.

  • All
  • Blog
  • News
Blog

The Dangers of Net Wrap Ingestion

September 20, 2022 No Comments

Can cattle eat net twine?   Cattle cannot digest net wrap. It has a tendency to accumulate in the rumen over time. Most cattle will lose …

Read More →
Blog

Hillco Harrow Cart – Raising the Bar on Spike Wear

August 2, 2022 No Comments

How durable are the spikes Hillco uses? Very durable. The Spike design offers heavy duty tooth bars and teeth made from high carbon steel.  Why …

Read More →
Blog

Not Your Grandfather’s Springtooth

July 22, 2022 No Comments

Is the Hillco Springtooth the same as all the others? The short answer is no, read below to find out the differences.  What is the …

Read More →
Blog

Guide to Hillco Air Flow Systems

July 7, 2022 No Comments

How does the Hillco Air Flow System work? The Hillco kit will replace the stock intake on your Case IH or New Holland equipment. All …

Read More →
News

Hillco Technologies, Inc. and John Deere introduce the Hillco Single Pass Round Bale System

May 25, 2022 No Comments

NEZPERCE, Idaho (August 21, 2014) – Hillco Technologies, Inc., working in developmental partnership with John Deere, has developed a revolutionary new system for harvesting corn …

Read More →
News

Hillco Single Pass Round Bale System Review

November 7, 2014 No Comments

Quality. Efficiency. Sustainability. All in one round bale Tractor.com: Enter Hillco Technologies, Inc., a Nezperce, Idaho manufacturer well-known for its forage leveling systems. Through a …

Read More →
Blog

The Dangers of Net Wrap Ingestion

September 20, 2022

Can cattle eat net twine?   Cattle cannot digest net wrap. It has a tendency to accumulate in the rumen over time. Most cattle will lose …

Read More →
Blog

Hillco Harrow Cart – Raising the Bar on Spike Wear

August 2, 2022

How durable are the spikes Hillco uses? Very durable. The Spike design offers heavy duty tooth bars and teeth made from high carbon steel.  Why …

Read More →
Blog

Not Your Grandfather’s Springtooth

July 22, 2022

Is the Hillco Springtooth the same as all the others? The short answer is no, read below to find out the differences.  What is the …

Read More →
Blog

Guide to Hillco Air Flow Systems

July 7, 2022

How does the Hillco Air Flow System work? The Hillco kit will replace the stock intake on your Case IH or New Holland equipment. All …

Read More →
News

Hillco Technologies, Inc. and John Deere introduce the Hillco Single Pass Round Bale System

May 25, 2022

NEZPERCE, Idaho (August 21, 2014) – Hillco Technologies, Inc., working in developmental partnership with John Deere, has developed a revolutionary new system for harvesting corn …

Read More →
News

Hillco Single Pass Round Bale System Review

November 7, 2014

Quality. Efficiency. Sustainability. All in one round bale Tractor.com: Enter Hillco Technologies, Inc., a Nezperce, Idaho manufacturer well-known for its forage leveling systems. Through a …

Read More →
Experience our Leveling Advantage

Connect with us

Connect
Shopping Cart
Scroll to Top
close-roi-calculator
Return on Investment Calculator

This calculator is designed to determine the return on investment for a Hillco leveling system equipped combine versus a non-leveling combine operating in sloping conditions.

Crop Type
Wheat       Corn and Soybean
Acreage Information

Crop Information

Enter your operation's statistics and estimates.
Wheat
Corn
Soybeans

Acreage / Slope Information

Estimate the percentage of total harvested acres that lay within the various slope ranges in your farming operation.
For all Wheat Acreage
See Slope reference chart
Percentage slope values must equal 100%
100%
Your Harvest Speeds and Machine Harvested Yield (MHY)

Non-Leveling Ground Speed in MPH

Enter the average harvesting speed for your non-leveling combine in the various slope ranges at the average yield entered in the Crop Information section above.

Slope Reference Graph
Wheat
Corn
Soy

Reduction in Machine Harvested Yield (bu/acre)

Estimate the reduction of Machine Harvested Yield (MHY) for each slope range if you were harvesting at the speed you entered for 0-3% slopes. (The calcultor will then project expected reductions in MHY for each slope range at your previously estimated ground speeds.)

You may opt to enter the test data which was determined by actual field testing by Hillco (based on 5 mph harvesting speed).

Reduction in MHY is used in these calculations rather than field loss. Reduction in MHY is a more accurate guage of combine harvesting efficiency because it can be determined by actually weighing the harvested yield rather than estimating the amount of yield lost to the ground.

Use test data or your own
Corn
Soy
Your Combine and Header Information
Enter your expected combine harvesting efficiency. Typically a combine operates at approximately 70% efficiency. If the Total Annual Separator Hours calculated below look too small you may want to decrease the combine efficiency. If the Total Annual Separator Hours calculated below look too large you may want to increase the combine efficiency.
Wheat head width in feet
Corn head width in feet
Flex header width in feet
Combine Field Efficiency (Typically 70%)
(Must enter value other than 0%)
Your Operational Costs
This total should include additional cost of benefits and taxes. If you wish to include the grain cart operator's cost add the hourly wage to the combine operator hourly labor costs.
Combine Operator Labor Cost (per hour, including taxes and benefits)
Combine Fuel Cost

If you wish to include added grain cart fuel add hourly grain cart fuel usage to the combine fuel usage.

Combine Fuel Consumption (Hourly - Typically 11-13 gph)

Cost per added separator hour usually runs approximately $180 per hour for new combines to $30 per hour for older used combines. If you don't want to consider the added benefit of lower separator hours enter $0.

Cost Per Separator Hour
(How much does your combine devalue for each added separator hour of use?)

Use example prices below or obtain a quote from your local dealership.

List price examples for leveling systems used on John Deere combines:
Leveling System Model 2955S for -- 9560-70 STS combine dual tire, w/ Hillco Leveler Installed = $42,960.00 List Price

Leveling System Model 2970S for -- 96-97-9860-70 STS combine,dual tire w/ Hillco Leveler Installed = $42,085.00 List Price

List price examples for leveling systems used on Case-IH combines:
Leveling System Model 2800 for -- 2577-88 combine, dual tire w/Hillco Leveler, Installed = $42,210.00 List Price


See examples or call your local dealership for a quote.
(On Leveling System Financing)

Enter the number of years (from 1 to 5, whole number) for the desired calculation period.

Market value at the end of 5 years regardless of the length of the calculation period.

Used in net present value calculation

Cash Flows (Totals for Calculation Period)
Positive Cash Flows
Labor Savings
0
Fuel and Lubcriation Savings
0
Increased Income from Machine Harvested Yield
0
Residual Value of Leveling System (At end of Calculation Period)
0
Increased Combine Value Due to Reduced Separator Hours
0
Total Positive Cash Flows
0
Negative Cash Flows
Leveling System Cost (Total Principle & Interest Payments)
-0
Remaining Principle Balance On 5 Year Note
-0
Leveling System Maintenance Cost (Annual 2% of Purchase Price)
-0
Total Negative Cash Flows
-0
Total Net Cash Flow (Positive - Negative)
0
Investment Analysis
Total Average Annual Separator Hours (without leveling system)
0
Total Average Annual Separator Hours (with leveling system)
0
Average Annual Separator Hour Savings
0
Total Separator Hour Savings as % of Total Separator Hours
0
Average Payback Period (in years)
The length of time it takes for an investment to recover its initial cost.
0
Total Net Present Value of Cash Flows
NPV compares the value of a dollar today to the value of that same dollar in the future, taking inflation and returns into account.
0
Internal Rate of Return
The internal rate of return (IRR) method allows you to consider the time value of money. It is the interest rate that is equivalent to the dollar returns you expect from your project. Once you know the rate, you can compare it to the rates you could earn by investing your money in other projects or investments. Usually a business owner will insist that in order to be acceptable, a project must be expected to earn an IRR that is at least several percentage points higher than the cost of borrowing, to compensate the company for its risk, time, and trouble associated with the project.
0